KLÜBERBIO LG 39-700 N 180 KG
KLÜBERBIO LG 39-700 N is an Environmentally Acceptable Lubricant (EAL) designed for maximal efficiency and protection for your open gear drives. Powerfully adhesive, combined with excellent wear and corrosion protection. It is optimised for use in spray systems — even in low temperatures — helping you cut down on your operating costs.
Description
KLÜBERBIO LG 39-700 N – 180 KG Drum (EAL Open Gear & Jack-Up Grease)
Product Overview
KLÜBERBIO LG 39-700 N is a high-performance, environmentally acceptable grease developed for open gear drives, rack & pinion systems, jack-up lifting systems, rudder stocks and other heavily loaded marine equipment. Its advanced natural ester base oil and modern additive package deliver excellent load-carrying capacity, powerful corrosion protection, strong wear resistance and outstanding adhesion to metal surfaces.
This grease provides reliable pumpability in centralized lubrication systems down to –30 °C and spray performance up to 0 °C, enabling trouble-free operation in cold climate regions. When used in jack-up lifting systems with spray application, KLÜBERBIO LG 39-700 N can reduce lubricant consumption by over 50%, lowering operating costs and minimizing waste.
KLÜBERBIO LG 39-700 N meets the EPA 2013 VGP requirements for EAL lubricants and is also fully compliant with OSPAR (Norway Yellow 1, Denmark reg. 2458948, Cefas E reg. 27423). Its natural-ester base oil is 100% renewable and biodegradable, reducing environmental impact in case of leakage.
Supplied here in a 180 KG drum for high-volume offshore and marine operations.
Key Features
-
Fully compliant Environmentally Acceptable Lubricant (EAL) – EPA VGP 2013
-
OSPAR-compliant (Norway Yellow 1, Denmark 2458948, Cefas E 27423)
-
High load-carrying capacity
-
Excellent adhesion for minimal sling-off
-
Very strong corrosion and wear protection
-
Optimised for spray lubrication
-
Reliable performance at low temperatures
Benefits
-
Environmentally friendly with renewable, biodegradable base oil
-
Protects open gears and jack-up systems from corrosion and wear
-
Strong adhesion prevents drip-off and contamination
-
Wide temperature operating range (–30 °C to high load conditions)
-
More than 50% reduction in grease consumption with spray application
-
Cost-effective for heavy-duty offshore use
Full Technical Specifications
General
| Property | Value |
|---|---|
| IMO/EU Hazard Classification | C-30 |
| EAL Classification | EPA VGP 2013 compliant |
| OSPAR Compliance | Norway Yellow 1, Denmark 2458948, Cefas E 27423 |
| Colour | Beige |
| Texture | Homogeneous |
Physical Properties
| Property | Value |
|---|---|
| Density @ 20°C | ~0.93 g/cm³ |
| Biodegradability (OECD 301 F) | ≥60% |
| Base Oil Viscosity @ 40°C | ~680 mm²/s |
| Base Oil Viscosity @ 100°C | ~90 mm²/s |
| Chemical Composition – Thickener | Calcium soap |
| Chemical Composition – Base Oil | Natural ester |
| Packing Size | 180 kg |
Technical Data
| Property | Value |
|---|---|
| Flow Pressure @ –30°C | ≤1400 mbar |
| Shelf Life | 24 months |
| VGP Compliance | Passed |
Performance Data
| Property | Value |
|---|---|
| Drop Point (ISO 2176) | ≥100°C |
| FZG Scuffing A/2.76/50 | >12 load stage |
| Worked Penetration (Lower) | 355 × 0.1 mm |
| Worked Penetration (Upper) | 385 × 0.1 mm |
Recommended Applications
KLÜBERBIO LG 39-700 N is designed for:
-
Open gear drives
-
Rack and pinion systems
-
Jack-up lifting systems
-
Rudder stocks
-
Heavily loaded sliding surfaces
-
Offshore and marine machinery requiring EAL compliance
Ideal for offshore wind installation vessels, jack-up rigs, cranes, lifting systems and marine construction machinery operating under heavy loads and seawater exposure.
Directions for Use
Apply using:
-
Spray lubrication systems
-
Transfer pinion lubrication
-
Automatic central lubrication systems
-
Manual brush
When exposed to moisture or water, the lubricant may slightly increase in consistency—this enhances adhesion and improves water resistance.
