KLÜBERBIO LG 39-700 N 25 KG
KLÜBERBIO LG 39-700 N is an Environmentally Acceptable Lubricant (EAL) designed for maximal efficiency and protection for your open gear drives. Powerfully adhesive, combined with excellent wear and corrosion protection. It is optimised for use in spray systems — even in low temperatures — helping you cut down on your operating costs.
Description
KLÜBERBIO LG 39-700 N – 25 KG (EAL Open Gear & Jack-Up Grease)
Product Overview
KLÜBERBIO LG 39-700 N is a high-performance, environmentally acceptable grease developed for open gear drives, rack-and-pinion systems, jack-up lifting systems, rudder stocks and other heavily loaded marine equipment. Its advanced natural-ester base oil and modern additive technology deliver high load-carrying capacity, excellent corrosion protection, strong antiwear performance and superior adhesion to metal surfaces.
Designed for cold climate operation, KLÜBERBIO LG 39-700 N provides reliable pumpability down to –30 °C in centralized lubrication systems and can be applied by spray systems at 0 °C. In jack-up lifting systems, the product can reduce grease consumption by more than 50% when applied via spray lubrication, lowering operating costs and minimizing waste.
KLÜBERBIO LG 39-700 N complies fully with the EPA 2013 Vessel General Permit (VGP) requirements for Environmentally Acceptable Lubricants (EAL). Its natural ester base oil is biodegradable and made from renewable resources, ensuring minimal environmental impact in case of leakage.
This version is supplied in a 25 KG pail, suitable for manual application, smaller gear systems and equipment servicing.
Key Features
-
EPA VGP 2013-compliant Environmentally Acceptable Lubricant (EAL)
-
Strong adhesion for reduced sling-off
-
High antiwear and anticorrosion performance
-
Excellent pumpability down to –30 °C
-
Optimised for spray lubrication systems
-
Suitable for cold climate offshore operations
-
Natural ester–based, biodegradable formulation
Benefits
-
Reduces wear and extends equipment life
-
Lower grease consumption (>50% reduction with spray systems)
-
Minimal environmental impact
-
Protects against corrosion caused by seawater exposure
-
Performs reliably over wide temperature ranges
-
Prevents contamination of deck or cargo due to drip-off
Full Technical Specifications
General
| Property | Value |
|---|---|
| IMO/EU Hazard Classification | C-30 |
| EAL Classification | EPA VGP 2013 compliant |
| Colour | Beige |
| Texture | Homogeneous |
Physical Properties
| Property | Value |
|---|---|
| Density @ 20°C | ~0.93 g/cm³ |
| Biodegradability (OECD 301 F) | ≥60% |
| Base Oil Viscosity @ 40°C | ~680 mm²/s |
| Base Oil Viscosity @ 100°C | ~90 mm²/s |
| Chemical Composition – Thickener | Calcium soap |
| Chemical Composition – Base Oil | Natural ester |
| Packing Size | 25 kg |
Technical Data
| Property | Value |
|---|---|
| Flow Pressure @ –30°C | ≤1400 mbar |
| Shelf Life | 24 months |
| VGP Compliance | Passed |
Performance Data
| Property | Value |
|---|---|
| Drop Point | ≥100°C |
| FZG Scuffing A/2.76/50 | >12 load stage |
| Worked Penetration (Lower) | 355 × 0.1 mm |
| Worked Penetration (Upper) | 385 × 0.1 mm |
Recommended Applications
KLÜBERBIO LG 39-700 N is ideal for:
-
Open gear drives
-
Rack-and-pinion systems
-
Jack-up lifting systems
-
Rudder stocks
-
Heavily loaded sliding surfaces
-
Marine and offshore machinery requiring EAL lubricants
Suitable for offshore wind vessels, jack-up rigs, cranes, lifting systems and heavy marine construction machinery exposed to seawater and extreme loads.
Directions for Use
Apply using:
-
Spray lubrication systems
-
Transfer pinion lubrication
-
Automatic centralized greasing systems
-
Manual brush
Exposure to moisture may increase grease consistency, enhancing adhesion and water resistance.
