KLÜBERBIO LG 39-701 N 18 KG
KLÜBERBIO LG 39-701 N is an Environmentally Acceptable Lubricant (EAL) designed for maximal efficiency and protection for your open gear drives. Powerfully adhesive, combined with excellent wear and corrosion protection. It is optimised for use in spray systems — even in low temperatures — helping you cut down on your operating costs.
Description
KLÜBERBIO LG 39-701 N – 18 KG (EAL Open Gear & Jack-Up Grease)
Product Overview
KLÜBERBIO LG 39-701 N is a high-performance, environmentally acceptable grease designed for open gear drives, rack-and-pinion systems, jack-up lifting systems, rudder stocks and other heavily loaded marine equipment. Its modern natural-ester base oil and advanced additive package deliver excellent adhesion to metal surfaces, high load-carrying capacity, strong antiwear performance and superior corrosion protection.
Optimised for demanding offshore and marine operations, KLÜBERBIO LG 39-701 N can be pumped reliably in centralized lubrication systems down to –30 °C and applied by spray systems at 0 °C. When used in jack-up systems with spray lubrication, this grease can reduce consumption by over 50%, significantly lowering operational costs and environmental impact.
The product is fully compliant with the EPA 2013 Vessel General Permit (VGP) for Environmentally Acceptable Lubricants (EAL) and meets key OSPAR requirements (Norway Yellow 1, Denmark 2458948, Cefas E 27423). Its fully biodegradable natural-ester base oil ensures minimal environmental risk in case of leakage.
This 18 KG packaging is ideal for manual application, service operations, smaller installations and maintenance crews that require portability.
Key Features
-
Certified Environmentally Acceptable Lubricant (EAL) – EPA VGP 2013
-
OSPAR-compliant (Norway Yellow 1, Denmark 2458948, Cefas E 27423)
-
High adhesion and strong corrosion protection
-
Excellent performance in low temperatures
-
Optimised for spray lubrication
-
Strong antiwear and load-carrying capability
-
Natural ester–based, biodegradable formulation
Benefits
-
Environmentally friendly – biodegradable and renewable base oil
-
Reduces wear and extends component lifespan
-
Wide temperature operating range (–30 °C to high load operation)
-
Reduced grease sling-off and deck contamination
-
>50% reduction in grease consumption with spray systems
-
Cost-effective and reliable for offshore environments
Full Technical Specifications
General
| Property | Value |
|---|---|
| IMO/EU Hazard Classification | C-30 |
| EAL Classification | EPA VGP 2013 compliant |
| OSPAR Compliance | Norway Yellow 1, Denmark 2458948, Cefas E 27423 |
| Colour | Beige |
| Texture | Homogeneous |
Physical Properties
| Property | Value |
|---|---|
| Density @ 20°C | ~0.94 g/cm³ |
| Biodegradability (OECD 301 F) | ≥60% |
| Base Oil Viscosity @ 40°C | ~680 mm²/s |
| Base Oil Viscosity @ 100°C | ~90 mm²/s |
| Chemical Composition – Thickener | Calcium soap |
| Chemical Composition – Base Oil | Natural ester |
| Packing Size | 18 kg |
Technical Data
| Property | Value |
|---|---|
| Flow Pressure @ –30°C | ≤1400 mbar |
| Shelf Life | 24 months |
| VGP Compliance | Passed |
Performance Data
| Property | Value |
|---|---|
| Drop Point | ≥100°C |
| FZG Scuffing A/2.76/50 | >12 load stage |
| Worked Penetration (Lower) | 300 × 0.1 mm |
| Worked Penetration (Upper) | 330 × 0.1 mm |
Recommended Applications
KLÜBERBIO LG 39-701 N is ideal for:
-
Open gear drives
-
Rack-and-pinion systems
-
Jack-up lifting systems
-
Rudder stocks
-
Heavily loaded sliding surfaces
-
Marine and offshore machinery requiring EAL lubricants
Designed for offshore wind installation vessels, jack-up rigs, cranes, lifting systems and marine construction equipment exposed to seawater, load cycles and cold climate operations.
Directions for Use
Apply using:
-
Spray lubrication systems
-
Transfer pinion lubrication
-
Automatic centralized greasing systems
-
Manual brush
Contact with moisture may increase grease consistency, improving adhesion and water resistance.
