Våre Unitor™ og Nalfleet™ test kits brukes over hele verden for nøyaktige målinger av pH, klor, oksygen, alkalitet, hardhet, jern, nitrat og glykol.
Testsettene leveres med alt nødvendig utstyr, kjemikalier og bruksanvisninger – klare til bruk om bord eller på anlegg.
Kontakt oss dersom du trenger spesifikke reagenser, reservedeler eller ønsker hjelp til å velge riktig analysekit.
-
- Oil Test Kits, Test kits and reagents
BACTERIA COUNT TEST (10 PCS)
- BT2 general purpose microbiological dip slides are used for rapid, on board monitoring of microbial contamination in water systems. They can be used to test waste waters and engine cooling waters. The slide is coated with TTC media which supports the growth of most common bacteria.
-
- Test kits and reagents
BALLAST CHECK 2 TEST KIT
- Ballast-Check 2 is a multiple turnover Pulse Amplitude Modulated (PAM) fluorometer that provides a rapid, indicative analysis of the Abundance and Activity of algae in ballast water samples. The instrument is configured to provide ship operators with a rapid, indicative determination of whether treated ballast water is at risk of non-compliance with the IMO and USCG, D2 quality standard. Please…
-
- Test kits and reagents
CONDUCTIVITY METER PEN MODEL
- Low cost and waterproof hand-held Conductivity pen meter for the measurement of Conductivity in a variety of water samples.
-
- Test kits and reagents
DEHA CHECKIT TEST KIT
- Controlling dissolved oxygen in boiler feed water and boiler water is important to avoid pitting corrosion in boiler systems. Oxygen Scavenger Plus contains DEHA, a low toxicity oxygen scavenger that is distributed throughout the boiler system. Dosage level of Oxygen Scavenger Plus is based on the DEHA value measured in the condensate water.
-
- Test kits and reagents
E.COLI/COLIFORM (25 TESTS)
- The most basic test for bacterial contamination of a water supply is the test for total coliform bacteria. Total coliform counts give a general indication of the sanitary condition of a water supply. For consistent results, an incubator should be used to culture the samples and the correct temperature. (UV lamp supplied separately)
-
- Glykol & Kjølevæske, Test kits and reagents
GLYCOL REFRACTOMETER RHA 218 ATC
- The Glycol Refractometer offers a convenient, fast and accurate way to access the glycol concentration of engine coolants and other anti-freeze solutions.
-
- Test kits and reagents
HYD900-1.010
- Accessory: Hydrometer to pair with Density meter for the measurement of density both Distillate and Residual Fuel Oil. 3 ranges of hydrometers are available: 0.80 - 1.01 Wide range but less discrimination 0.85 - 0.95 Lighter fuels DMA - RMH0 (632513) 0.90 - 1.01 Heavier fuels RMD - RML (632521)
-
- Test kits and reagents
MOTOR SHIP TEST KIT MO246A.
- Compact combined drop test kit for measuring p-Alkalinity, Chloride and Nitrite in cooling water and low-pressure boiler systems.Helps ensure proper chemical balance and corrosion prevention.
-
- Test kits and reagents
PH/ EC/ TDS/ SALINITY MULTI PEN TESTER
- The Multi Pen Tester is a vital tool for maritime professionals, offering precise pH, conductivity, TDS, and salinity measurements. Built for harsh marine environments, its rugged, waterproof design ensures durability. With a user-friendly interface and automatic calibration, the Multi Pen Tester simplifies water quality testing for technical water operations, ballast water monitoring, and potable water management in a compact, reliable…
-
- Test kits and reagents
POTABLE WATER TEST KIT
- Improperly managed water on ships serves as a key pathway for infectious disease transmission, as evidenced by Rooney et al.'s review of 100+ outbreaks, with a fifth attributed to waterborne routes. The WHO's "Guide to Ship Sanitation" emphasizes the ship operator's duty to ensure clean, pathogen-free water for all uses, necessitating constant monitoring, reporting of adverse results, and prompt corrective…
-
- Glykol & Kjølevæske, Test kits and reagents
REFRACTOMETER
- The Brix Refractometer measures concentration % of industrial fluids such as cutting/grinding coolants, oil/water concentrations, fluid/water ratios. Temperature compensated Refractometer is to be used with Sub Sea Test Kit.
-
- Test kits and reagents
SALINITY TEST METER
- Low cost and waterproof hand-held Salinity meter for the measurement of salinity in a range of water samples. The Salinity Meter is used to check the IMO D1 standard is for ballast water exchange. The D1 standard specifies the volume of water to be exchanged and the target salinity of the ballast water, typically >30ppt.
-
- Test kits and reagents
SPECTRAPAK 309
- Spectrapak™ 309 - Cooling Water Test Kit. Controlling key parameters in engine cooling waters is important for optimum corrosion protection. Test included: Nitrite, Chloride & pH
-
- Test kits and reagents
SPECTRAPAK 310
- Spectrapak™ 310 Test kit - Low Pressure Boiler Water Test Kit. Controlling key parameters is important to maintain control of boiler system water quality for protection against corrosion and scale formation.
-
- Test kits and reagents
SPECTRAPAK 311
- Spectrapak™ 311 - Boiler Water Test Kit. Controlling key parameters for medium and high pressure boiler systems is important to maintain control of your water quality for protection against corrosion and scale formation.
-
- Test kits and reagents
SPECTRAPAK 312
- Spectrapak™ 312 - Hydrazine Upgrade Pack (Add-on option to Spectrapak 311 and 315) Hydrazine reacts with oxygen, acting as a scavenger. The reaction results in nitrogen and water with no solids being added to the boiler system. Some of the hydrazine will carry over with the steam, aiding in maintaining the condensate pH in an alkaline range, which thereby helps…
-
- Test kits and reagents
SPECTRAPAK 315
- Spectrapak™ 315 - Low Pressure Boiler Water Test Kit, Controlling key parameters is important to maintain control of boiler system water quality for protection against corrosion and scale formation. Please note that oxygen scavenger testing is provided separately (Spectrapak™ 312 for Hydrazine. Spectrapak™ 313 for DEHA and Sulphite test kit for Sulphite).
-
- Test kits and reagents
TEST KIT FOR COOLTREAT AL
- Cooling Water Test Kit for measuring key parameters in engine and cooling systems. Ensures corrosion protection and proper chemical balance in marine and industrial applications.
-
- Test kits and reagents
TOTAL RESIDUAL OXIDANT (TRO) CALIBRATION KIT
- TRO Calibration Solution kit is a calibration solution compatible and to be use with HF Scientific TRO Analyser. Compatible HF TRO Analyser include CLX-EX, CLX-EX2, CLX-XT, CLX-XT2
-
- Oil Test Kits, Test kits and reagents
UNITOR BACTERIA SINGLE TEST KIT
- More and more problems are seen with distillate fuels being infected by microorganisms such as bacteria, fungus and algae. The reduction of sulphur is a main reason for the increase in contamination. Sulphur acts as a natural protection against microbial growth in fuel and the more environmentally friendly fuels with low sulphur levels have the unfortunate drawback of making the…
-
- Oil Test Kits, Test kits and reagents
UNITOR EASYSHIP COMBINED TEST KIT
- Condition monitoring allows user to make informed operational and maintenance decisions about critical equipment. The ability to test on-site and conduct oil analysis easily to detect potential issues such as out-of-spec fuels and lubricants quickly, helps to prevent critical failures. Unitor™ Combined Oil Test Kit contains all of the necessary equipment and consumables for oil condition monitoring needs. Unitor Combined…
-
- Oil Test Kits, Test kits and reagents
UNITOR EASYSHIP WATER TEST KIT
- Condition monitorng allows user to make informed operational and maintenance decisions about critical equipment. Water in oil has the potential to cause corrosion, cavitation or failure. Hence it is essential to have the ability to test on-site and conduct oil analysis to detect out-of-spec fuels and lubricants so to root out the presence of water in oil.


























