The AQUAGUARD™ BW chemical dosing system is designed to apply boiler water treatment chemicals direct from the chemical drum. The application of the chemical treatment programme is proportional to the quantity of Boiler feedwater into the system.
AQUAGUARD™ CW is a chemical dosing system designed to safely control and apply corrosion inhibitors to engine cooling water circuits. The application of the chemical is controlled by conductivity measurement. The conductivity of the cooling water is proportional to the level of the engine cooling water treatment. For use with the following products: Rocor NB, Nallfleet 2000, Cooltreat AL, EWT…
Equipment for blowing soot remover powder into boiler fire-side or into the gas side of exhaust gas boilers. This simple, low cost injector ensures rapid and effective dosing of powder so that soot and firescale may be removed most efficiently.
The Gamma X 1602 is a solenoid driven chemical dosing pump, supplied as the primary control pump for the **Aquaguard BW** dosing system. The metered quantity is directly displayed in l/h. The large illuminated liquid crystal display makes sure that all displayed variables are simple to read.
Equipment for blowing soot remover powder into boiler fire-side or into the gas side of exhaust gas boilers. This simple, low cost injector ensures rapid and effective dosing of powder so that soot and firescale may be removed most efficiently.
The dosing unit consists of: * Dosing Pump * 60 Litre Dosing Container * Adjustable suction assembly with float switch * 25 metre PE Dosing Tube * PVDF Injection Valve Seawater Dosing Station DOES NOT contain the Switchover Unit for two dosing points. This has to be ordered separately in case of two dosing points
Unitor Vacuum Dosing System with a cap pump ensures accurate and timely Treatment of Unitor Vacuum Pipe Cleaner into piping, tanks and other ancillary pipe equipmen
