BT2 general purpose microbiological dip slides are used for rapid, on board monitoring of microbial contamination in water systems. They can be used to test waste waters and engine cooling waters. The slide is coated with TTC media which supports the growth of most common bacteria.
A wall mounted cabinet of rugged design. The cabinet contain all the core tests for fuel oil and lubricating oil. The equipment is easy to use for the engine room crew. Unitor Digital Cell provides a refreshed, but familiar, interface with the addition of smart features to enhance the user experience over previous versions of the product. Unitor Digital Cell…
More and more problems are seen with distillate fuels being infected by microorganisms such as bacteria, fungus and algae. The reduction of sulphur is a main reason for the increase in contamination. Sulphur acts as a natural protection against microbial growth in fuel and the more environmentally friendly fuels with low sulphur levels have the unfortunate drawback of making the…
Much of the heavy fuel oil (HFO), burnt in the cylinders of large 2-stroke marine diesel engines, is contaminated with hard particles known as catalytic (cat) fines. These particles, which find their way into the fuel at the oil refinery, can cause catastrophic abrasive damage to engine cylinder liners during the combustion process. This problem has been inadvertently exacerbated by…
The Unitor™ Cold Corrosion Test Kit allows ship owners and operators to obtain an accurate picture of the level of corrosive elements present in cylinder oil, potentially preventing critical damage before it occurs. The kit provides accurate results on-board in less than five minutes, negating the need to send samples to a laboratory to be analysed. With IMO 2020, the…
The WSS Combined Test Kit Plus facilitates efficient evaluation of fuel and lubricant quality, enabling real-time assessment of water contamination and chemical stability. Regular analysis allows early issue detection, proactive maintenance, and informed decision-making for prolonged equipment life and enhanced system reliability. The latest addition minimizes test time through user acceleration, reducing reagent usage by 40%, waste by 80%, and…
The WSS Combined Test Kit Plus facilitates efficient evaluation of fuel and lubricant quality, enabling real-time assessment of water contamination and chemical stability. Regular analysis allows early issue detection, proactive maintenance, and informed decision-making for prolonged equipment life and enhanced system reliability. The latest addition minimizes test time through user acceleration, reducing reagent usage by 40%, waste by 80%, and…
Being able to understand the compatibility of your fuel is very important. When the fuel is bunkered it is difficult to understand the condition of the fuel, how stable it is and if it needs any sort of help to remain stable. With the Unitor Compatibility Test Kit you can easily and quickly get an assessment on the stability and…
Condition monitoring allows user to make informed operational and maintenance decisions about critical equipment. The ability to test on-site and conduct oil analysis easily to detect potential issues such as out-of-spec fuels and lubricants quickly, helps to prevent critical failures. Unitor™ Combined Oil Test Kit contains all of the necessary equipment and consumables for oil condition monitoring needs. Unitor Combined…
Condition monitorng allows user to make informed operational and maintenance decisions about critical equipment. Water in oil has the potential to cause corrosion, cavitation or failure. Hence it is essential to have the ability to test on-site and conduct oil analysis to detect out-of-spec fuels and lubricants so to root out the presence of water in oil.
Unitor™ Ferrous Wear Meter (FWM) helps you to protect your engine and cylinder from unwanted wear by VLSFO introduced through IMO 2020. Unitor™ FWM detects abrasive wear particles in lubricating oil samples and offers a simple and easy way to control wear in your engine and cylinders. By trending of ferrous wear measurements over time, any increase in wear levels…
Testing fuel oil viscosity is important for verifying the correct grade of fuel is delivered, for calculating combustion performance, plus adjusting of fuel handling and injection systems. Viscosity of lube oil is the most important property with the correct viscosity providing optimum film strength in system clearances, with minimum friction losses and leakage.
Testing for a correct level of Total Base Number (TBN) can help you to optimize the lubricating oil feed rate to the engine. it is also recommeneded to conduct adequate monitoring of TBN of lubricating oil in order to prevent fouling within the engine and corrosion of the engine components. The Unitor™ TBN test kit provides a rapid indication of…
