BT2 general purpose microbiological dip slides are used for rapid, on board monitoring of microbial contamination in water systems. They can be used to test waste waters and engine cooling waters. The slide is coated with TTC media which supports the growth of most common bacteria.
Ballast-Check 2 is a multiple turnover Pulse Amplitude Modulated (PAM) fluorometer that provides a rapid, indicative analysis of the Abundance and Activity of algae in ballast water samples. The instrument is configured to provide ship operators with a rapid, indicative determination of whether treated ballast water is at risk of non-compliance with the IMO and USCG, D2 quality standard. Please…
Controlling dissolved oxygen in boiler feed water and boiler water is important to avoid pitting corrosion in boiler systems. Oxygen Scavenger Plus contains DEHA, a low toxicity oxygen scavenger that is distributed throughout the boiler system. Dosage level of Oxygen Scavenger Plus is based on the DEHA value measured in the condensate water.
The most basic test for bacterial contamination of a water supply is the test for total coliform bacteria. Total coliform counts give a general indication of the sanitary condition of a water supply. For consistent results, an incubator should be used to culture the samples and the correct temperature. (UV lamp supplied separately)
The Glycol Refractometer offers a convenient, fast and accurate way to access the glycol concentration of engine coolants and other anti-freeze solutions.
Improperly managed water on ships serves as a key pathway for infectious disease transmission, as evidenced by Rooney et al.'s review of 100+ outbreaks, with a fifth attributed to waterborne routes. The WHO's "Guide to Ship Sanitation" emphasizes the ship operator's duty to ensure clean, pathogen-free water for all uses, necessitating constant monitoring, reporting of adverse results, and prompt corrective…
The Brix Refractometer measures concentration % of industrial fluids such as cutting/grinding coolants, oil/water concentrations, fluid/water ratios. Temperature compensated Refractometer is to be used with Sub Sea Test Kit.
Spectrapak™ 309 - Cooling Water Test Kit. Controlling key parameters in engine cooling waters is important for optimum corrosion protection. Test included: Nitrite, Chloride & pH
Spectrapak™ 310 Test kit - Low Pressure Boiler Water Test Kit. Controlling key parameters is important to maintain control of boiler system water quality for protection against corrosion and scale formation.
Spectrapak™ 311 - Boiler Water Test Kit. Controlling key parameters for medium and high pressure boiler systems is important to maintain control of your water quality for protection against corrosion and scale formation.
Spectrapak™ 312 - Hydrazine Upgrade Pack (Add-on option to Spectrapak 311 and 315) Hydrazine reacts with oxygen, acting as a scavenger. The reaction results in nitrogen and water with no solids being added to the boiler system. Some of the hydrazine will carry over with the steam, aiding in maintaining the condensate pH in an alkaline range, which thereby helps…
Spectrapak™ 315 - Low Pressure Boiler Water Test Kit, Controlling key parameters is important to maintain control of boiler system water quality for protection against corrosion and scale formation. Please note that oxygen scavenger testing is provided separately (Spectrapak™ 312 for Hydrazine. Spectrapak™ 313 for DEHA and Sulphite test kit for Sulphite).
TRO Calibration Solution kit is a calibration solution compatible and to be use with HF Scientific TRO Analyser. Compatible HF TRO Analyser include CLX-EX, CLX-EX2, CLX-XT, CLX-XT2
More and more problems are seen with distillate fuels being infected by microorganisms such as bacteria, fungus and algae. The reduction of sulphur is a main reason for the increase in contamination. Sulphur acts as a natural protection against microbial growth in fuel and the more environmentally friendly fuels with low sulphur levels have the unfortunate drawback of making the…
Condition monitoring allows user to make informed operational and maintenance decisions about critical equipment. The ability to test on-site and conduct oil analysis easily to detect potential issues such as out-of-spec fuels and lubricants quickly, helps to prevent critical failures. Unitor™ Combined Oil Test Kit contains all of the necessary equipment and consumables for oil condition monitoring needs. Unitor Combined…
Condition monitorng allows user to make informed operational and maintenance decisions about critical equipment. Water in oil has the potential to cause corrosion, cavitation or failure. Hence it is essential to have the ability to test on-site and conduct oil analysis to detect out-of-spec fuels and lubricants so to root out the presence of water in oil.
