-
- ACCESSORIES
ANTI SPATTER SPRAY. 6PCS
- Anti spatter spray for wire welding (MIG/MAG).
-
- ACCESSORIES
AUTODARK 2020 WELDING SHIELD
- Head mounted face shield for protection of the welder's eyes and face against rays, heat and sparks during welding
-
- ACCESSORIES
AUTODARK 820 FRESHAIR COMPLETE
- Autodark 820 Freshair complete consists of a welding helmet and a fresh air system for use in poor ventilation areas to protect welder from welding rays and fumes.
-
- ACCESSORIES
BACK PORTABLE RACK
- Back-frame for transportation of two 5 liters gas cylinders.
-
- ACCESSORIES
CHIPPING HAMMER ST. 2PCS
- Chipping hammer steel. 2 pcs for welding.
-
- ACCESSORIES
CUTTING NOZZLE 10- 25MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 140MM LENGTH 40-75MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 153MM LENGTH 25-40MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 25- 50MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 3- 10MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 50-100MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
EL.HOLDER 200A WITH DIX25 CONNECTOR
- Electrode holder assembly 200A with 3m cable 25mm2 and DIX 25 connector for UWI-150 TP welding inverter.
-
- ACCESSORIES
ELECTRODE HOLDER TWISTY 200AMP
- Electrode holder twisty 200 amps for electrode diameter 1.6-3.2 mm.
-
- ACCESSORIES
ELECTRODE HOLDER TWISTY 400AMP
- Electrode holder twisty 400 amps for electrode diameter 1.6-5.0 mm.
-
- ACCESSORIES
ELECTRODE HOLDER UNIKING 600AMP
- Electrode holder 600 amps for electrode diameter 1.6-8.0 mm.
-
- ACCESSORIES
FACE SHIELD W/HANDLE
- Hand held face shield for protection of welders eyes and face towards rays, heat and sparks during welding
-
- ACCESSORIES
FLIPVISION WELDING FACE SHIELD
- Head mounted face shield for protection of the welder's eyes and face against rays, heat and sparks during welding.
-
- ACCESSORIES
GOUGING NOZZLE
- The gouging nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
LEATHER APRON F/WELDING
- Leather Apron for welding
-
- ACCESSORIES
MINIDRYER- 350
- The Minidryer-350 is designed to pre-dry or restore moist electrode before welding especially for low hydrogen and stainless steel electrodes.
-
- ACCESSORIES
PICKLING GEL 2L F/STAINLESS STEEL
- Pickling gel for discoloration removal and passivation of surface especially after stainless steel welding.
-
- ACCESSORIES
TIG TORCH ACCESSORIES KIT
- Accessories kit for T-150,T-161 and T-200 TIG-torches.
-
- ACCESSORIES
TROLLEY A-5/O-5 F/GAS WELDING KIT
- Trolley for two cylinders securing cylinders during work and transportation.
-
- ACCESSORIES
UCT-500 COMBINATION TORCH COMPACT
- The UCT-500 Compact kit is a handy kit consisting of most equipment needed to perform the normally occurring heating, brazing, welding and cutting applications onboard.
-
- ACCESSORIES
UCT-500 COMBINATION TORCH MASTER
- The UCT-500 Master kit has been assembled to cover all ordinary Acetylene / Oxygen welding, brazing and cutting work that may occur on board.
-
- ACCESSORIES
WELD.GOGGLES W/LIFT-FRONT
- Lightweight goggles with soft and comfortable surfaces against the face for gas welding, brazing and cutting applications.
-
- ACCESSORIES
WELDERS GLOVES. 6 PAIRS
- Thick skin gloves for protecting hands when doing electric arc welding.