PRODUKT INFORMASJON:
Produktnummer: 614537
Liter: 15 ltr
Unitor™ Foam-Agent™ is a water based non-flammable foam additive.
Product information
Unitor™ Foam-Agent™ enhances the cleaning efficiency of the cleaning chemicals being used by prolonging the contact time on the soiled surface. In addition it will also be a more economical use of the cleaning chemicals.
Features
- Biodegradable
- Does not contain nonylphenol ethoxylates or other estrogenic compounds
- Non-flammable
- Suitable for use with our water based alkaline cleaning chemicals
Benefits
- Prevents the chemicals from running off vertical surfaces, and increases the resident time
- Create a dense foam
- Enhance chemical soaking
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Light yellow |
|---|---|
| Density [g/ml] | 1,085-1,095 |
| Form | Liquid |
| pH | 8-8.5 |
Approvals
- This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
Directions for use
Dosing method
Unitor™ Foam-Agent™ can be used together with the below mentioned water based cleaning chemicals. This makes it possible to apply the chemicals as foam,and prevent that the cleaning chemicals run off from vertical surfaces.
Unitor™ Aquatuff™, Unitor™ Aquabreak PX™, Unitor™ Alkleen Liquid™, Unitor™ Alkleen Safety Liquid™, Unitor™ Fore & Aft™ and Unitor™ H.P. Wash™.
Add 50 ml Unitor™ Foam-Agent™ per 10 litres washing solution, mix and apply with foam-equipment onto soiled surfaces.
Advice to follow the directions for use for the actual cleaning product.
After the cleaning process:
Unitor™ Defoamer Concentrate™ edp 651 661843 can be used to remove undesirable foam.