IMPACT WRENCH IW-PRO 3/4″ NG
The UNITOR Impact wrench IW-PRO 3/4″ NG is a new generation impact wrench with a lighter weight, robust and higher torque for high performance mechanical works onboard.
Description
It meets all the requirements expected of a UNITOR tool with the quality expectations and the reliability for the everyday use onboard a vessel. This is a tool recognized and appreciated by professionals worldwide for all routine bolting/un-bolting works onboard.
Safety Before start using this tool make sure you have read and understood the user manual. Make sure you are wearing the correct personal protection equipment. Always use correct type of impact sockets when using this tool, be aware of if ordinary sockets are used, they might shatter and cause serious injury to the operator. We strongly recommend using hearing protection, eye protection (goggles) and gloves while using the tool.
Features
- A very powerful, reversible nut-runner with adjustable torque
- 3-positions power management makes it easier not to over torque the bolts
- Ideal bolt capacity up to 1.1/4″ or 32mm
Benefits
- Easy to operate
- Ergonomic design for better grip and balance
- Powerful and hard-hitting impact wrench with max torque of 1627Nm
Specification
General
| Invent Hazard Material (IMO/EU) classification | NA |
|---|
Dimensions/Weight
| Diameter [mm] | 9.525 |
|---|---|
| Weight [kg] | 5.0 |
Technical data
| Air consumption [m³/min] | 396 l/min / 14 scfm |
|---|---|
| Air inlet connection [inch] | 3/8″ NPT |
| Air pressure [bar] | 90 – 115PSI / 6.2 – 7.9 BAR |
| Sound power level (Lw) [dB] | 110.6 (dB) |
| Torque [Nm] | 1200 FT-LBS / 1627 NM |
| Vibration level (m/s²) | 6.42 |
