TANKLEEN TAR 210 LTR
Unitor™ Tankleen Tar™ is a concentrated, heavy-duty solvent based cleaner and degreaser. It is particularly effective as a spot cleaner on stubborn deposits as dried tars and bitumen on tank walls.
Description
Product information
Features
- Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties, can also be used for the removal of tars, bitumen and similar difficult tank contamination’s.
- The emulsifying agents in this product are biological degradable.
- Easy rinse off, leaving clean and oil-free surfaces and safe to use on most metal surfaces, painted surfaces and tank coatings.
Benefits
- Saves time through quick action.
- Reduces the number of products needed as the product work both as spot and re-circulation cleaner
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Clear pale yellow |
|---|---|
| Density [g/ml] | 1,18 |
| Flash Point [°C] | Above 85 |
| Form | Liquid |
Safety Data Sheet (SDS)
Documents
Directions for use
Spot cleaning
Unitor™ Tankleen Tar™ can be sprayed neat onto tank surfaces to be cleaned. The contact time should be at least 20 minutes to solubilise hard films before rinsing with fresh water. Bulkheads/walls can be washed down by use of tank washing machines or high pressure cleaning machines. Slops should be constantly stripped from the tank and transferred to a holding tank or pumped ashore to slop tanks.
Re-circulation method – for tank cleaning machines
It is advised to use a solution of 10% i.e. 100 litres per ton of hot wash water mixed in the tank to be cleaned. The washing solution is usually 5 – 10% of the tank capacity. Recirculate using a tank washing machine for 4 – 8 hours at 50 – 60 dg. C.
Dose rates and results will vary depending on contamination, the temperature of cleaning solution, and number of tanks to be cleaned with the solution.
