Produktnummer: 681 – 210074
Forpakning: 200 ltr
KLÜBERBIO LM 2-32 is a fully biodegradable, eco-friendly hydraulic fluid based on synthetic ester oils..
Ship owners have many reasons to transition their onboard hydraulic machinery to environmentally acceptable lubricants (EAL) such as a reduction in fines, concern for the environment and impact to organizational reputation should a spill occur. In addition, proposed changes to US regulations will require deck equipment that extends over the water to use EALs. In specific markets, requirements for low temperature hydraulic oils is growing hand in hand with the expansion of shipping routes into arctic regions, including oil and gas activities and expedition cruises in artic regions. As a result, Klüber Lubrication has developed the Klüberbio LM 2 range of EAL hydraulic fluids that reduce impacts on the environment, meet demanding OEM specifications and are based on fully saturated synthetic ester oils.
Klüberbio LM 2 oils are fully biodegradable, eco-friendly hydraulic fluids based on synthetic ester oils. The product series complies also with the U.S. Environmental Protection Agency’s requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation standards according to Appendix A of the EPA’s Vessel General Permit (VGP). In addition, Klüberbio LM 2 oils meet or even exceed the minimum requirements of HEES oils according to ISO 15380.
– Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit). – Fully biodegradable, non-toxic products reducing environmental impact in the event of leakage – Facilitate start-up of hydraulic systems at very low temperatures due to very good viscosity-temperature behaviour and low pour point; can therefore be used in hydraulic systems with high temperature fluctuations. – In addition, Klüberbio LM 2 oils meet or even exceed the minimum requirements of HEES oils according to ISO 15380.
|Invent Hazard Material (IMO/EU) classification||C-3|
|Biodegradability of the base oil, acc. to OECD 301 F, (within 28 days) [%]||>= 60 %|
|Density at 20°C [g/cm³]||approx. 0.915 g/cm³ (DIN 51757)|
|Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C [mm²/s]||approx. 6.3 mm²/s|
|Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C [mm²/s]||approx. 32 mm²/s|
|Packing Size||200 LTR|
|Chemical composition, type of oil||ester oil|
|ISO viscosity grade of the base oil, DIN ISO 3448||32|
|Shelf life [months]||48|
|Vessel General Permit||fulfilled|
|Viscosity index, DIN ISO 2909||>= 135|
|Anticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °C||no rust corrosion degree|
|Copper corrosion, DIN EN ISO 2160, 3 h/100 °C||1 – 100 corrosion degree|
|Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus [°C]||>= 220 °C|
|Foam test, ASTM-D 892, ISO 6247, sequence I/24 °C [ml]||<= 150/0 ml|
|Foam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C [ml]||<= 80/0 ml|
|Foam test, ASTM-D 892, ISO 6247, sequence III/24°C [ml]||<= 150/0 ml|
|FZG scuffing test, based on DIN ISO 14635-1, A/8.3/90, scuffing load stage||>= 12|
|Lower service temperature||-45 °C / -49 °F|
|Pour point, DIN ISO 3016 [°C]||<= -50 °C|
|Upper service temperature||110 °C / 230 °F|
Directions for use
KLÜBERBIO LM 2-32 is intended for applications in mobile hydraulic systems, e.g. in the marine and offshore industries as well as for use in the building and water engineering sectors. They are also preferred in stationary hydraulic equipment operating in ecologically sensitive environments, e.g. in hydroelectric power plants and waterway locks