PICKLING GEL 2L F/STAINLESS STEEL
Pickling gel for discoloration removal and passivation of surface especially after stainless steel welding.
Description
Unitor pickling gel is used to remove oxides and discoloration on stainless steel welds and surrounding surfaces.
Features
- HD polyethylene container supplied together with brush
- In gel state
Benefits
- Safe handling and ready to use
- Product will stick in vertical and overhead positions
- Removes surface micro slag particles and other contaminates after welding which may cause local corrosion
- Pickling restores completely the materials corrosion resistance
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Dimensions/Weight
| Weight [kg] | 2.5 |
|---|
Technical data
| Shelf life [months] | 13 months stored at 20°C in unopened condition |
|---|
Approvals
ASTM 380 and ASTM 967
Safety Data Sheet (SDS)
Documents
Directions for use
Recommended temperature limits for application: 10°C – 40°C and do not pickle under direct sunlight
- Stir the gel to a smooth consistency
- Spread a thick layer on to the work surface using the brush supplied
- Allow the gel to remain for 50-90 minutes
- Rinse off the reminding gel using fresh water
- The waste water, after rinsing, contains acids and heavy metals, and must hence be treated according to local wastewater requirements before discharge
