The acid test kit is the fastest and easiest way of checking for acid in the refrigeration compressor oil. The QwikCheck® indicator paper will change from golden yellow to pink or red when being exposed to as little as 1 part per million (PPM) of acid. It is ideal for preventative maintenance checks or for verifying proper acid clean-up after…
Ballast-Check 2 is a multiple turnover Pulse Amplitude Modulated (PAM) fluorometer that provides a rapid, indicative analysis of the Abundance and Activity of algae in ballast water samples. The instrument is configured to provide ship operators with a rapid, indicative determination of whether treated ballast water is at risk of non-compliance with the IMO and USCG, D2 quality standard. Please…
CHECKIT® Comparator Test Kits are accurate, easy to use test kits for water analysis. Simply add the reagent to the sample cell, rotate the disc until the color matches the prepared water sample and read the concentration value.
Controlling dissolved oxygen in boiler feed water and boiler water is important to avoid pitting corrosion in boiler systems. Oxygen Scavenger Plus contains DEHA, a low toxicity oxygen scavenger that is distributed throughout the boiler system. Dosage level of Oxygen Scavenger Plus is based on the DEHA value measured in the condensate water.
The most basic test for bacterial contamination of a water supply is the test for total coliform bacteria. Total coliform counts give a general indication of the sanitary condition of a water supply. For consistent results, an incubator should be used to culture the samples and the correct temperature. (UV lamp supplied separately)
The Glycol Refractometer offers a convenient, fast and accurate way to access the glycol concentration of engine coolants and other anti-freeze solutions.
Improperly managed water on ships serves as a key pathway for infectious disease transmission, as evidenced by Rooney et al.'s review of 100+ outbreaks, with a fifth attributed to waterborne routes. The WHO's "Guide to Ship Sanitation" emphasizes the ship operator's duty to ensure clean, pathogen-free water for all uses, necessitating constant monitoring, reporting of adverse results, and prompt corrective…
Spectrapak™ 309 - Cooling Water Test Kit. Controlling key parameters in engine cooling waters is important for optimum corrosion protection. Test included: Nitrite, Chloride & pH
Spectrapak™ 312 - Hydrazine Upgrade Pack (Add-on option to Spectrapak 311 and 315) Hydrazine reacts with oxygen, acting as a scavenger. The reaction results in nitrogen and water with no solids being added to the boiler system. Some of the hydrazine will carry over with the steam, aiding in maintaining the condensate pH in an alkaline range, which thereby helps…
The WSS Combined Test Kit Plus facilitates efficient evaluation of fuel and lubricant quality, enabling real-time assessment of water contamination and chemical stability. Regular analysis allows early issue detection, proactive maintenance, and informed decision-making for prolonged equipment life and enhanced system reliability. The latest addition minimizes test time through user acceleration, reducing reagent usage by 40%, waste by 80%, and…
Condition monitoring allows user to make informed operational and maintenance decisions about critical equipment. The ability to test on-site and conduct oil analysis easily to detect potential issues such as out-of-spec fuels and lubricants quickly, helps to prevent critical failures. Unitor™ Combined Oil Test Kit contains all of the necessary equipment and consumables for oil condition monitoring needs. Unitor Combined…
Testing for a correct level of Total Base Number (TBN) can help you to optimize the lubricating oil feed rate to the engine. it is also recommeneded to conduct adequate monitoring of TBN of lubricating oil in order to prevent fouling within the engine and corrosion of the engine components. The Unitor™ TBN test kit provides a rapid indication of…
