Skip to content
Welding Basic welding kit for UWI-230 TP AC/DC, UWI-320TP and UWI-500TP welding machines ready for stick electrode welding.
Welding Accessories Kit for UWW-301 TP Wire Welder is a kit ready for selfshield / gasless wire welding and stick electrode welding.
Electrode unitor AG 45/60 BRAZING FLUX BAF.250G is a Boric Acid Fee (BAF) brazing flux for silver brazing applications, used with AG-60-252 and AG-45-253.
Electrode unitor Best choice and top quality Silver Brazing rod for shipboard welding. Flux coated silver brazing rod for wide range of base metals including Yorcalbro pipes and Cunifer type 90/10 and 70/30 pipes.
Electrode unitor Flux for use together with Alumag 235 when doing Gas and TIG Welding.
ACCESSORIES Anti spatter spray for wire welding (MIG/MAG).
Welding Auto darkening head mounted face shield for protection of the welder's eyes and face against rays, heat and sparks during welding.
Electrode unitor Flux for use together with Bronze-264 and FC-Bronze 261 for brazing.
Gas Hoses and Couplings Ear clamps are designed to secure a gas hose over a fitting to prevent gas from leaking at the connection.
ACCESSORIES Electrode holder assembly 200A with 3m cable 25mm2 and DIX 25 connector for UWI-150 TP welding inverter.
Electrode unitor Compact cabinet for shipboard welding electrodes storage and management.
Welding Compact cabinet for arc welding electrodes, including welding electrodes
ACCESSORIES Electrode holder twisty 200 amps for electrode diameter 1.6-3.2 mm.
ACCESSORIES Electrode holder 600 amps for electrode diameter 1.6-8.0 mm.
Electrode unitor Flux coated wear resistant brazing rod for copper, copper alloys, steel and cast iron.
Electrode unitor Flux coated wear resistant brazing rod for copper, copper alloys, steel and cast iron.
Electrode unitor All position basic AC/DC electrode with 120% recovery for welding steels with min 680N/mm2 yield strength.
Electrode unitor All positional low hydrogen electrode for welding of higher strength steels, depositing weld metal with a minimum yield strength of 550 N/mm2 after stress relieving.
Gas Hoses and Couplings Gas Hose 6.3mm (1/4inch) Blue,50 meter coil for Oxygen used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 6.3mm (1/4inch) Red,50 meter coil for Acetylene used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 9.0mm (3/8inch) Blue,50 meter coil for Oxygen used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 9.0mm (3/8inch) Red,50 meter coil for Acetylene used for welding, cutting, brazing etc.
Welding This cabinet is a complete gas welding work shop with equipment and consumables for all normal gas welding, brazing and cutting operations on board.
Gas Hoses and Couplings Worm drive hose clamps are used where there is a need for rapid mounting/dismantling of hoses.
Electrode unitor TIG welding rod for welding duplex stainless steels such as 2205 (UNS Number N31803) and WNr. 1.4462.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
ACCESSORIES The Minidryer-350 is designed to pre-dry or restore moist electrode before welding especially for low hydrogen and stainless steel electrodes.
ACCESSORIES Pickling gel for discoloration removal and passivation of surface especially after stainless steel welding.
Regulators Good quality Oxy-Acetylene Gas Regulators and compliant to maritime regulations including OCIMF SIRE and RIGHTSHIP RISQ
Regulators Good quality Shielding Gas Regulators used for Argon or Argon Carbon Dioxide (CO2) gas mixtures.
Regulators Single-stage Shielding Gas Regulators used for Carbon Dioxide (CO2) gas especially for UNITOR C-9 and C-27 cylinders.
Regulators A single stage regulator for nitrogen reducing the inlet pressure from 200bar to any pressure between 0 and 10 bar.
Regulators Good quality Oxy-Acetylene Gas Regulators and compliant to maritime regulations including OCIMF SIRE and RIGHTSHIP RISQ
Regulators A single stage regulator for nitrogen reducing the inlet pressure from 200bar to any pressure between 0 and 200 bar. One of the main application used onboard is for pressure accumulators (pressure dampers).
ACCESSORIES Accessories kit for T-150,T-161 and T-200 TIG-torches.
Gas Hoses and Couplings Twin Hose 2x6.3mm (1/4inch) Red/Blue,50 meter coil for Oxygen and Acetylene used for welding, cutting, brazing etc.