DEFOAMER CONCENTR. 25 LTR
Unitor™ Defoamer Concentrate™ is a non-silicone based water dispersible, liquid defoamer. It controls foaming in sewage and waste water systems, and it is stable in alkaline conditions.
Description
Product information
This product supersedes product no: 624314
Unitor™ Defoamer Concentrate™ can be used to remove foam in water based systems and collecting tanks in vacuum toilet systems.
Features
- Non-silicone defoamer
- Stable in alkaline conditions
- Outstanding for all atmospheric, pressurised and continuous waste equipment
- Approved by ZENON Environmental Inc. for use in membrane bio reactor systems
Benefits
- Can be used in sewage and waste water systems
- Excellent to control foaming and remove foam when necessary
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Yellow brown |
|---|---|
| Density [g/ml] | 0,86-0,90 |
| Flash Point [°C] | 85 |
| Form | Liquid |
Approvals
- Approved by ZENON Environmental Inc. for use in membrane bio reactor systems
Safety Data Sheet (SDS)
Documents
Directions for use
Effective dosage will vary depending on foam origin, stability and the area of defoamer application. Trials are always the best way to determine defoaming capabilities and efficiency.
Dosing method
Typical dosage is 10 to 30ml/tonne, but proper dosage rate to be found out on site testing.
The recommended dosing method for sewage systems is to premix 1 part of Unitor™ Defoamer Concentrate™ with 5 parts of fresh water and pump this into the EVAC ejector tank. The dosing is done about 1/2 hour before top load.
