-
Gas Distribution System (25)
Gas Distribution System -
- Electrode unitor
18/8-321N 1.6X300MM 213 PCS 1,7 KG
- Electrode for welding of stainless steel grades SUS304L and SUS316L.
-
- Electrode unitor
18/8-321N 2.5X300MM 89 PCS 1.7 KG
- Electrode for welding of stainless steel grades SUS304L and SUS316L.
-
- Electrode unitor
18/8MO-221 2.0 X 500 MM 0,5KG
- TIG welding rod for stainless steel.
-
- Gas Distribution System
AC HIGH PRESSURE CONNECTOR
- GDS spare part for central installation corresponding to Position 5 in the drawing.
-
- Gas Distribution System
AC LOW PRESS.CONNECTOR W/PREW.UNION
- Spare part according drawing position number 9/10/11.
-
- Welding
ACCESSORIES KIT F/UWI-230,-320,-500
- Basic welding kit for UWI-230 TP AC/DC, UWI-320TP and UWI-500TP welding machines ready for stick electrode welding.
-
- Welding
ACCESSORIES KIT F/UWW-301 TP
- Accessories Kit for UWW-301 TP Wire Welder is a kit ready for selfshield / gasless wire welding and stick electrode welding.
-
- Electrode unitor
AG 45 253 2.0 X 500MM 0,4KG
- Bare silver brazing rod for most metals and able to use on larger joint gap up to 1.0mm.
-
- Electrode unitor
AG 45/60 BRAZING FLUX BAF.250G
- AG 45/60 BRAZING FLUX BAF.250G is a Boric Acid Fee (BAF) brazing flux for silver brazing applications, used with AG-60-252 and AG-45-253.
-
- Electrode unitor
AG 60 252 2.0 X 500MM 0,5KG
- Best choice and top quality Silver Brazing rod for shipboard welding. Flux coated silver brazing rod for wide range of base metals including Yorcalbro pipes and Cunifer type 90/10 and 70/30 pipes.
-
- Electrode unitor
ALBRO-FLUX 263 PF 250G
- Flux for use together with AG-60-252 silver brazing rods on Yorcalbro pipes.
-
- Electrode unitor
ALUFLUX 234 F. 250 G
- Flux for use together with Alumag 235 when doing Gas and TIG Welding.
-
- Electrode unitor
ALUMAG 235 3.0MM GAS TIG WELD 0.5KG
- TIG welding rod for aluminium, sea water resistant aluminium and cast aluminium, containing up to 5% Mg.
-
- ACCESSORIES
ANTI SPATTER SPRAY. 6PCS
- Anti spatter spray for wire welding (MIG/MAG).
-
- ACCESSORIES
AUTODARK 2020 WELDING SHIELD
- Head mounted face shield for protection of the welder's eyes and face against rays, heat and sparks during welding
-
- ACCESSORIES
AUTODARK 820 FRESHAIR COMPLETE
- Autodark 820 Freshair complete consists of a welding helmet and a fresh air system for use in poor ventilation areas to protect welder from welding rays and fumes.
-
- Gas Distribution System
AUTOMATIC QUICK ACTING SHUTOFF DEVICE AC HDS17
- An automatic slam shut device to stop acetylene decomposition in the acetylene manifold.
-
- ACCESSORIES
BACK PORTABLE RACK
- Back-frame for transportation of two 5 liters gas cylinders.
-
- Gas Distribution System
BLIND PLUG
- GDS spare part for central installation corresponding to Position 4 in the drawing.
-
- Electrode unitor
BRONZE-264 3.0 X 500MM 1,7KG
- Bare brazing rod for copper, copper alloys and steel.
-
- Electrode unitor
BRONZE-FLUX 261 PF. 250G
- Flux for use together with Bronze-264 and FC-Bronze 261 for brazing.
-
- ACCESSORIES
CHIPPING HAMMER ST. 2PCS
- Chipping hammer steel. 2 pcs for welding.
-
- Gas Hoses and Couplings
CLAMP 1 EAR 12,3-14,3MM 1/4″ HOSE (20PCS)
- Ear clamps are designed to secure a gas hose over a fitting to prevent gas from leaking at the connection.
-
- Gas Distribution System
CLOSING VALVE AC W/BRACKET
- GDS spare part for central installation corresponding to Position 6 in the drawing.
-
- Gas Distribution System
CLOSING VALVE OX W/ BRACKET
- GDS spare part for central installation corresponding to Position 6 in the drawing.
-
- Gas Distribution System
CONNECTION NUT AC 1/4″ FOR AC T-VALVE
- GDS spare part for central installation corresponding to Position 4 in the drawing.
-
- Gas Distribution System
CONNECTION NUT OX 1/4″ FOR OX T-VALVE
- GDS spare part for central installation corresponding to Position 4 in the drawing.
-
- ACCESSORIES
CUTTING NOZZLE 10- 25MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 140MM LENGTH 40-75MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
-
- ACCESSORIES
CUTTING NOZZLE 153MM LENGTH 25-40MM
- The cutting nozzles are specially made for use with UCT-500 gas cutting equipment and with oxy/acetylene gases.
