Skip to content
Welding Basic welding kit for UWI-230 TP AC/DC, UWI-320TP and UWI-500TP welding machines ready for stick electrode welding.
Welding Accessories Kit for UWW-301 TP Wire Welder is a kit ready for selfshield / gasless wire welding and stick electrode welding.
Electrode unitor Bare silver brazing rod for most metals and able to use on larger joint gap up to 1.0mm.
Electrode unitor AG 45/60 BRAZING FLUX BAF.250G is a Boric Acid Fee (BAF) brazing flux for silver brazing applications, used with AG-60-252 and AG-45-253.
Electrode unitor Best choice and top quality Silver Brazing rod for shipboard welding. Flux coated silver brazing rod for wide range of base metals including Yorcalbro pipes and Cunifer type 90/10 and 70/30 pipes.
Electrode unitor Flux for use together with AG-60-252 silver brazing rods on Yorcalbro pipes.
Electrode unitor Flux for use together with Alumag 235 when doing Gas and TIG Welding.
Electrode unitor TIG welding rod for aluminium, sea water resistant aluminium and cast aluminium, containing up to 5% Mg.
ACCESSORIES Anti spatter spray for wire welding (MIG/MAG).
Welding Auto darkening head mounted face shield for protection of the welder's eyes and face against rays, heat and sparks during welding.
Electrode unitor Flux for use together with Bronze-264 and FC-Bronze 261 for brazing.
Gas Hoses and Couplings Ear clamps are designed to secure a gas hose over a fitting to prevent gas from leaking at the connection.
ACCESSORIES Electrode holder assembly 200A with 3m cable 25mm2 and DIX 25 connector for UWI-150 TP welding inverter.
Electrode unitor Compact cabinet for shipboard welding electrodes storage and management.
Welding Compact cabinet for arc welding electrodes, including welding electrodes
ACCESSORIES Electrode holder twisty 200 amps for electrode diameter 1.6-3.2 mm.
ACCESSORIES Electrode holder twisty 400 amps for electrode diameter 1.6-5.0 mm.
ACCESSORIES Electrode holder 600 amps for electrode diameter 1.6-8.0 mm.
Electrode unitor Flux coated wear resistant brazing rod for copper, copper alloys, steel and cast iron.
Electrode unitor Flux coated wear resistant brazing rod for copper, copper alloys, steel and cast iron.
Electrode unitor All position basic AC/DC electrode with 120% recovery for welding steels with min 680N/mm2 yield strength.
Electrode unitor All positional low hydrogen electrode for welding of higher strength steels, depositing weld metal with a minimum yield strength of 550 N/mm2 after stress relieving.
Gas Hoses and Couplings Gas Hose 6.3mm (1/4inch) Blue,50 meter coil for Oxygen used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 6.3mm (1/4inch) Red,50 meter coil for Acetylene used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 9.0mm (3/8inch) Blue,50 meter coil for Oxygen used for welding, cutting, brazing etc.
Gas Hoses and Couplings Gas Hose 9.0mm (3/8inch) Red,50 meter coil for Acetylene used for welding, cutting, brazing etc.
Welding This cabinet is a complete gas welding work shop with equipment and consumables for all normal gas welding, brazing and cutting operations on board.
Welding Empty storage cabinet for gas welding rods, brazing rods, fluxes and gas welding equipment.
Gas Hoses and Couplings Ear clamps offer a better and safer solution comparred to worm type / jubilee clips when mounting hoses.
Gas Hoses and Couplings Worm drive hose clamps are used where there is a need for rapid mounting/dismantling of hoses.
Electrode unitor Cr-Mo TIG welding rod for high temperature steel like boiler tubes.
Electrode unitor TIG welding rod for welding duplex stainless steels such as 2205 (UNS Number N31803) and WNr. 1.4462.
Welding Water activated cold curing product for emergency repairs.
Welding Water activated cold curing product for emergency repairs.
Welding Water activated cold curing product for emergency repairs.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
Electrode unitor Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel.
Welding Two components - an extremely fast, solvent free cold curing metal repair compound for most metals.
Welding Two component putty, solvent free, fast curing, synthetic metal repair compound for emergency repairs especially used for leaking pipes together with Leak Stop bandage.
Welding wo components, solvent free, normal cold curing metal repair compound for most metals.
ACCESSORIES The Minidryer-350 is designed to pre-dry or restore moist electrode before welding especially for low hydrogen and stainless steel electrodes.
Gas Distribution System Complete set of a Gas Distribution System (GDS) outlet point to be installed in the workshop.
ACCESSORIES Pickling gel for discoloration removal and passivation of surface especially after stainless steel welding.
Regulators Good quality Oxy-Acetylene Gas Regulators and compliant to maritime regulations including OCIMF SIRE and RIGHTSHIP RISQ
Regulators Good quality Shielding Gas Regulators used for Argon or Argon Carbon Dioxide (CO2) gas mixtures.
Regulators Single-stage Shielding Gas Regulators used for Carbon Dioxide (CO2) gas especially for UNITOR C-9 and C-27 cylinders.
Regulators A single stage regulator for nitrogen reducing the inlet pressure from 200bar to any pressure between 0 and 10 bar.
Regulators Good quality Oxy-Acetylene Gas Regulators and compliant to maritime regulations including OCIMF SIRE and RIGHTSHIP RISQ
Regulators A single stage regulator for nitrogen reducing the inlet pressure from 200bar to any pressure between 0 and 200 bar. One of the main application used onboard is for pressure accumulators (pressure dampers).
Welding Two components (liquid & paste), solvent free, cold curing vulcanising compound for repair of rubber items or on metal surfaces.
ACCESSORIES Accessories kit for T-150,T-161 and T-200 TIG-torches.
Electrode unitor Tungsten electrode 1.6mm 10 pcs alloyed for TIG Welding of various base materials including AC or DC welding capable, best performance in DC welding.
Electrode unitor Tungsten electrode 2.4mm 10pcs alloyed for TIG Welding of various base materials including AC or DC welding capable, best performance in DC welding.
Gas Hoses and Couplings Twin Hose 2x6.3mm (1/4inch) Red/Blue,50 meter coil for Oxygen and Acetylene used for welding, cutting, brazing etc.
Gas Hoses and Couplings Twin Hose 2x9.0mm (3/8inch) Red/Blue,50 meter coil for Oxygen and Acetylene used for welding, cutting, brazing etc.
ACCESSORIES The UCT-500 Master kit has been assembled to cover all ordinary Acetylene / Oxygen welding, brazing and cutting work that may occur on board.
Welding Undercarriage specially designed for mounting under UWI-500TP for easy transport of machine, cables and electrodes.
Welding , Welding machine The UPC-NEO NG is a new-generation, high performance, portable manual plasma cutting and gouging machine. It offers excellent weight-to-cutting ratio, can cut up to 40mm thickness of steel while weighing only 25kg.
Welding UWF-102 wire feeder is a compact and lightweight wire feeder designed for use with UWI-500TP welding inverter.
Welding , Welding machine UWI-150TP, compact and portable welding machine for shipboard welding with excellent performance-to-weight ratio for welding all normal coated electrodes up to 3.2mm, including Aluminium electrodes.
Welding , Welding machine UWI-203TP, is a compact 200A range welding machine supplied with stick electrode welding accessories for shipboard welding. It can weld all normal coated electrodes up to 4.0mm.
Welding , Welding machine UWI-320TP, is a compact yet powerful 320Amps welding machine for all types of shipboard welding. It can weld all normal coated electrodes up to 5.0mm. Two machines can be connected parallel together to achieve 640A for welding or gouging applications.
Welding , Welding machine UWI-500TP is a powerful welding inverter for all arc welding (Stick/TIG/MIG/MAG) & gouging processes onboard. Ideal for vessels requiring high duty cycle welding using very long welding cables extension especially deck maintenance etc.
Welding machine Compact and portable, the UWW-301 TP multi-process (MIG/MAG/Stick/TIG) welding machine is specially designed for shipboard’s high deposition wire welding and use in tight spaces. The welding machine is supplied "without" any accessories.
ACCESSORIES Lightweight goggles with soft and comfortable surfaces against the face for gas welding, brazing and cutting applications.
ACCESSORIES Thick skin gloves for protecting hands when doing electric arc welding.