EVAPORATOR DEFOAMER 4X5 LTR
NALFLEET™ Evaporator Defoamer™ is a concentrated antifoam for prevention of foaming problems in seawater evaporators.
Description
Product information
This product supersedes product no: 777214, (NALFLEET)
Features
- Concentrated antifoam, safe liquid, easy and economical dosing
- Certified by NSF in accordance with Standard 60
- Silicone free formulation
Benefits
- Antifoam properties that ensure distillate quality is high and carry over is eliminated
Specification
General
| Invent Hazard Material (IMO/EU) classification | NA |
|---|
Physical properties
| Appearance | Yellow |
|---|---|
| Density [g/ml] | 1.05 |
| Form | Liquid |
| Materials compatibility | No known effect on metals or rubber. |
| pH | 5.5 to 7.5 in 10% Solution |
Approvals
NSF International Certifies that this product conforms to the requirements of NSF/ANSI Standard 60 – Drinking Water Treatment Chemicals – Health Effects. Maximum use level according to NSF approval: 1 mg/lit.
Safety Data Sheet (SDS)
Documents
Directions for use
NALFLEET™ Evaporator Defoamer is used in conjunction with NALFLEET™ Vaptreat antiscalant when foaming problems occur in the evaporator. Foaming problems can occur with certain design of evaporators and under certain conditions like elevated sea water temperature. NALFLEET™ Evaporator Defoamer is used to combat such problems and prevent foaming and carry-over. NALFLEET™ Vaptreat is formulated with a defoamer in the product, however under certain conditions additional defoamer is required to maintain maximum operating efficiency of the plant.
Dosing Instructions
The standard dosage is 1% of the descalant dose.
for example, if the daily consumption of NALFLEET™ Vaptreat is 10 L, the recommended dose of NALFLEET™ Evaporator Defoamer is 0.1L. The maximum dosage of defoamer should not exceed 1 PPM based on rated output of the evaporator.
Dosing Method
NALFLEET™ Evaporator Defoamer has limited solubility in water. The best dosing method is to mix the product with the antiscalant and water in a dosing tank. The amount of defoamer in the mixture should not exceed 1% of the water added.
