AQUAGUARD™ CW is a chemical dosing system designed to safely control and apply corrosion inhibitors to engine cooling water circuits. The application of the chemical is controlled by conductivity measurement. The conductivity of the cooling water is proportional to the level of the engine cooling water treatment. For use with the following products: Rocor NB, Nallfleet 2000, Cooltreat AL, EWT…
NALFLEET™ AUTOTREAT™ is a multifunctional, liquid boiler water treatment product, formulated with alkaline compounds, scale inhibitor, dispersant, and volatile amines for the protection of the feed, boiler and condensate systems.
BT2 general purpose microbiological dip slides are used for rapid, on board monitoring of microbial contamination in water systems. They can be used to test waste waters and engine cooling waters. The slide is coated with TTC media which supports the growth of most common bacteria.
NALFLEET™ Ballast Tank Inhibitor 9-933™ is a liquid film-forming corrosion inhibitor. For use in ballast tanks, bilges, voids, cofferdams and barges. NALFLEET™ Ballast Tank Inhibitor 9-933™ is a blend of organic and inorganic inhibitors. It contains no chromates and is completely soluble in sea water.
NALFLEET™ BALLASTGUARD CIP CLEANER is an effective environmental friendly cleaning product based on specialised dispersant and citric acid. The product is designed to remove scale and iron rust. BallastGuard CIP Cleaner is designed to be used for Ballast Water System cleaning-in-place (CIP) cleaning Prefilter/filter cleaning and other related applications.
NALFLEET™ BALLASTGUARD SBS 40 is a bisulphite based liquid product designed to be used for ballast water treatment system to neutralize the Total Residual Oxidant (TRO) or Total Chlorine
BallastGuard STS Solid is typically used in Ballast Water Management system to neutralize the excess chlorine/oxidant residual for ballast water discharge compliance. It's a critical consumable for ballast water management system.
NALFLEET™ BWT Liquid Plus™ is a blend of phosphate, alkalinity and polymer dispersants designed for the control of scaling and corrosion in the boiler. NALFLEET™ BWT Liquid Plus™ can be used as a phosphate treatment for low hardness feed waters in boilers operating at pressures up to 40 bar.
NALFLEET™ Condensate Control™ is blend of liquid neutralising amines boiler water treatment product designed for effective corrosion control and protection in steam and condensate systems.
NALFLEET™ Cooltreat AL™ is an organic liquid corrosion inhibitor with extended life for use in closed engine cooling water treatment. This product offers protection for all commonly used materials in engine cooling water systems, including aluminium.
NALFLEET™ Cooltreat ELC™ is an organic liquid corrosion inhibitor and mono ethylene glycol blend that provides extended life corrosion and anti-freeze protection in closed cooling water systems.
Controlling dissolved oxygen in boiler feed water and boiler water is important to avoid pitting corrosion in boiler systems. Oxygen Scavenger Plus contains DEHA, a low toxicity oxygen scavenger that is distributed throughout the boiler system. Dosage level of Oxygen Scavenger Plus is based on the DEHA value measured in the condensate water.
NALFLEET™ Engine Water Treatment 9-108™ is a balanced mixture of corrosion inhibitors, formulated to give a high nitrite furnish which is becoming a more frequent requirement for the new generation of high efficiency diesel engines.
The Glycol Refractometer offers a convenient, fast and accurate way to access the glycol concentration of engine coolants and other anti-freeze solutions.
MAR-71™ is a very effective biocide, used to prevent and combat microbiological growth in closed cooling water systems as well as in lubricating oil systems.